TY - JOUR
T1 - Automation of the stone materials dosing process, controlled by variable frequency drives
AU - Morales-Romero, Guillermo
AU - Trinidad-Loli, Nicéforo
AU - Quispe-Andía, Adrián
AU - Caycho-Salas, Beatriz
AU - Quispe-Guía, Shirley
AU - Palacios-Huaraca, Carlos
AU - Chamorro-Atalaya, Omar
N1 - Publisher Copyright:
© 2021 Institute of Advanced Engineering and Science. All rights reserved.
PY - 2021/11
Y1 - 2021/11
N2 - The objective of this article is to determine to what extent the automation of the stone materials dosing process, controlled by sequential drive of frequency variators, contributes to improving the productivity of a company dedicated to the production of asphalt in Peru for which, initially, the characteristics of the procedure that will lead to achieving the automation will be described. The results will then be displayed with respect to the indicators used to compare productivity before and after automation. The automation will be done by means of the logo 230RE controller, which will be connected to three frequency inverters, the programming development will be through the logo soft comford V8 software, for the sequential actuation, timers with connection delay will be used. Applying the automation, it is possible to improve the annual efficiency by an average of 58.30%, this is reflected in the monthly decrease in production time by 13.92%, in turn increasing the amount of stone material produced by an average of 43.77%. Likewise, it is possible to significantly reduce the production loss capacity by an annual average of 93.99%.
AB - The objective of this article is to determine to what extent the automation of the stone materials dosing process, controlled by sequential drive of frequency variators, contributes to improving the productivity of a company dedicated to the production of asphalt in Peru for which, initially, the characteristics of the procedure that will lead to achieving the automation will be described. The results will then be displayed with respect to the indicators used to compare productivity before and after automation. The automation will be done by means of the logo 230RE controller, which will be connected to three frequency inverters, the programming development will be through the logo soft comford V8 software, for the sequential actuation, timers with connection delay will be used. Applying the automation, it is possible to improve the annual efficiency by an average of 58.30%, this is reflected in the monthly decrease in production time by 13.92%, in turn increasing the amount of stone material produced by an average of 43.77%. Likewise, it is possible to significantly reduce the production loss capacity by an annual average of 93.99%.
KW - Automation and control
KW - Dosing process
KW - Productivity
KW - Programmable logic controller
KW - Sequential drive
KW - Stone materials
KW - Variable frequency drive
UR - http://www.scopus.com/inward/record.url?scp=85118493891&partnerID=8YFLogxK
U2 - 10.11591/ijeecs.v24.i2.pp803-814
DO - 10.11591/ijeecs.v24.i2.pp803-814
M3 - Article
AN - SCOPUS:85118493891
SN - 2502-4752
VL - 24
SP - 794
EP - 802
JO - Indonesian Journal of Electrical Engineering and Computer Science
JF - Indonesian Journal of Electrical Engineering and Computer Science
IS - 2
ER -