Potential Use of the Fungus Trichoderma sp. as a Plastic-Reducing Agent and Electricity Generator in Microbial Fuel Cells

The mismanagement of plastic waste, organic waste, and the shortage of electricity in remote villages has created significant challenges for industries and governments. Therefore, this research aims to utilize the fungus Trichoderma sp. as a catalyst in microbial fuel cells, where the novelty of the research is the generation of electricity and the degradation of plastic simultaneously. In this study, single-chamber microbial fuel cells were constructed using carbon (anode) and zinc (cathode) electrodes. The substrate consisted of 20 gr of potato waste and 1.5 × 1.5 cm samples of plastic waste, all combined in 390 mL of Bushnell broth, into which Trichoderma sp. was inoculated. The highest electrical readings were recorded on day 23, showing values of 5.648 ± 0.093 mA and 0.479 ± 0.025 V. On the same day, the pH level was measured at 7.046 ± 0.314, and the substrate’s electrical conductivity was found to be 155.135 ± 2.569 mS/cm. Over the 45-day monitoring period, the chemical oxygen demand decreased by 78.67%. The microbial fuel cells achieved a maximum power density of 68.140 ± 2.418 mW/cm² at a current density of 4.719 mA/cm², with an internal resistance of 23.647 ± 1.514 Ω. Analysis of the plastic using FTIR (Fourier Transform Infrared Spectroscopy) revealed a decrease in the intensity of spectral bands associated with hydroxyl groups, C-H structural groups, methyl groups, and C=C bonds. Additionally, SEM (Scanning Electron Microscopy) images demonstrated a reduction in the thickness of the plastic film and the formation of voids and sheets, highlighting the potential of Trichoderma sp. for plastic degradation.